Key Specifications
Neoteck
4.9
131 reviewsBuy at Amazon
Prime Delivery • 30-Day Returns
Prime Delivery • 30-Day ReturnsNeoteck 2-in-1 Dual Probe Moisture Meter 40mm Spherical Moisture Reader & ±2.5% Accuracy Pin Moisture Meter with LCD Display and Audio Alarm for Wood Wall Concrete Drywall Firewood Lumber
Free Shipping
2-Year Warranty
30-Day Returns
Key Features
High-Accuracy Dual-Probe Design: Neoteck moisture meter combines a spherical pinless sensor and pin probe. Pinless mode enables non-destructive scanning of walls/floors/ceilings (40mm depth), using relative readings to rapidly compare and locate moisture concentration. Pin mode delivers high-precision (±2.5%) actual moisture measurement for wood (0-52%) and building materials (0-30%). Ideal for spot-checking lumber or structural elements
Custom Thresholds & Pre-Set Ranges: Customize your pinless moisture meter's MOIST/WET alerts using suggested thresholds: Plaster/Anhydrite (DRY<30, MOIST 30-60, WET>60), Cement Materials (DRY<25, MOIST 25-50, WET>50), or Wood (DRY<50, MOIST 50-80, WET>80). For direct measurements, pin mode features fixed WOOD Mode alerts: DRY 5-11.9%, MOIST 12-19.9%, WET 20-52%; BLD Mode: DRY 2-7.9%, MOIST 8-11.9%, WET 12-30%
Instant Visual & Audible Alerts: Neoteck moisture reader delivers clear warnings through color-coded LED: Green (DRY),Blue (MOIST),Red (WET)-paired with distinct audible alerts: Beep for MOIST conditions, rapid continuous beeping for WET levels. A dynamic bar graph visually tracks moisture progression while the mute function silences alarms when needed, retaining LED warnings for discreet inspections in sensitive environments
Rechargeable with Utility Function: Moisture reader powered by a 1200mAh battery with USB-C charging for continuous operation. Auto power-off conserves energy after 30 minutes of inactivity. The HOLD function locks readings in vibrating environments, while the backlit LCD ensures clear visibility in dark spaces like attics or crawlspaces
NOTE (Pinless Measurement): a. Must calibrate in air (>10cm from objects) when switching to Scan Mode, or readings are invalid. b.Press probe vertically flush against the surface. Avoid tilting, edges, or materials <5mm thick (may cause high/no readings). c. Avoid metal (nails/wires), salt, static, rough surfaces, or debris → clean measurement points for accuracy. d. Shows relative values only → compare multiple points to map moisture distribution. e.Cannot measure free water/surface film or display absolute moisture content
No description available for this product.
These factors represent the most critical aspects that will impact your satisfaction with this product.