MESTEK Pinless Wood Moisture Meters for Drywall, Water Leak Detector, Wall Moisture Tester for Lumber Concrete Building, Wall Moisture Sensor Digital Humidity Tester for Firewood

Key Specifications

Package Dimensions
‎6.5 x 2.5 x 1.3 inches
Item Weight
‎10.7 ounces
Manufacturer
‎MESTEK
Battery Cell Type
‎Alkaline
Power Source
‎Battery Powered
Included Components
pinless moisture meter

Reviewed by 444 people this week!

★★★★★
Buy at Amazon
AmazonPrime Delivery • 30-Day Returns
MESTEK
4.7
444 reviews
Buy at Amazon
AmazonPrime Delivery • 30-Day Returns

MESTEK Pinless Wood Moisture Meters for Drywall, Water Leak Detector, Wall Moisture Tester for Lumber Concrete Building, Wall Moisture Sensor Digital Humidity Tester for Firewood

The MESTEK WM710-BU is a compact, pinless (non-destructive) moisture meter aimed at home inspectors, restorers, flooring installers and DIYers who want to locate damp areas quickly without puncturing surfaces. It uses an induction-type sensor to scan materials (wood, drywall, concrete, masonry) to an advertised depth of roughly 0.78 in / 20 mm, displays results on a large color screen with a three-color dry/risk/wet bar, and includes features such as data-hold, audible out-of-range alarm and an auto power-off.

Free Shipping
2-Year Warranty
30-Day Returns

Key Features

✅【100% Non-destructive Measurement】Non-destructive induction hygrometer,which transmits and receives high-frequency electromagnetic wave signals from measured materials through the reverse sensor, can test all kinds of materials without destruction. Maximum measuring depth: 0.78 inches (20 mm)
✅【 Easy to use and High-precision Measurement】: Press the “SEL” button after the MESTEK wood moisture meter is turned on, and it only needs to wait for 3 seconds to start the measurement.HOLD button, auto power-off function, out of range alarm and low battery, batteries included. Adopting high-precision alloy probe and high-performance processing chip, the measurement is accurate and responsive, and the measurement range reaches 0.0-100.0 with measurement accurary: 4%
✅【3-inch HD Color Screen and Mold Prevention】: The moisture meter is equipped with a 3-inch HD color screen with three color analog bars and indicates "DRY", "RISK" and "WET" status by "Green", "Yellow" and "Red" respectively, which is very beautiful and intuitive, and very easy to read in low light conditions.by checking suspicious water stains with a moisture tester around the house, You can determine whether the area is wet (a perfect breeding ground for mold),but not tell the mold directly
✅【Wide Range of Uses】:Suitable for testing the moisture content of wood and building materials such as wallboard, slate, tiles, cardboard, plaster, concrete and mortar, as well as for repairing water leaks, checking the moisture content of bedroom walls, floor tiles or caravans, etc. by checking suspicious water stains with a moisture tester around the house, You can determine whether the area is wet and protect the structure of your house or flat
✅【Comfortable & Easy to Carry】:The side of the moisture meter is embedded with soft rubber, which is comfortable to touch. There is a cloth bag in the package, which is more convenient to carry and store. The moisture meter with a 3-year-replacement-warranty. If it let’s you down, we’ll replace it. No questions asked

The MESTEK WM710-BU is a compact, pinless (non-destructive) moisture meter aimed at home inspectors, restorers, flooring installers and DIYers who want to locate damp areas quickly without puncturing surfaces. It uses an induction-type sensor to scan materials (wood, drywall, concrete, masonry) to an advertised depth of roughly 0.78 in / 20 mm, displays results on a large color screen with a three-color dry/risk/wet bar, and includes features such as data-hold, audible out-of-range alarm and an auto power-off.

Key Considerations

1

Measurement method: Pinless (inductive) — non-destructive scanning, no probe holes.

2

Effective depth: Advertised up to ~20 mm (0.78 in) — depends on material density and layering.

3

Readout & UI: Large color LCD (≈3") with tri-color bar (Green = DRY, Yellow = RISK, Red = WET), numeric readout and audible alarm.

4

Measurement range & accuracy: Listings show wide display range (0.0–100.0 scale) and state an accuracy around ±4% (manufacturer page / seller spec). Verify against your use case.

1

Because the WM710 uses an inductive sensor, you can scan finished floors, painted drywall and visible trim without leaving probe holes. That’s especially useful when surveying carpeting, hardwood, laminate or finished surfaces after leaks — you get surface/near-surface moisture mapping without damage. Keep in mind pinless tools read a volume beneath the sensor, not a tiny contact point.

These factors represent the most critical aspects that will impact your satisfaction with this product.

Customer Reviews

Great for pinless sensor.
2025-12-08T06:43:54.872Z

It seems to work fairly well. I compared to another more expensive sensor and the readings were comparable for pinless. The pinless did show more moisture than pin method in wood, but crazy higher like some others. It will be a nice tool to always have on hand and if I find an issue, I can use the more expensive one to confirm. I don't want to expose the pin sensor to damage from carrying day to day in my work vehicle.

U
Amazon Customer
Quality Moisture Meter, Accurate and Consistent
2025-12-08T06:44:21.015Z

Overall seems to be very consistent and accurate. Has a 3 inch color screen that is very bright and easy to read. This is the first pinless moisture meter I have used, and I am impressed. It also comes with a 3 year, no questions asked, replacement guarantee which is a great thing. Would definately recommend.

U
Allen

Frequently Asked Questions

Final Verdict

The MESTEK WM710 (ASIN B0FQ2VYCHF) is a practical, budget-minded pinless moisture meter that gives fast, non-destructive scans for wood, drywall and masonry to roughly 20 mm depth. Its large color display, tri-color alarm bar and portability make it well suited to quick leak triage, pre-finish floor checks and general home inspection work. For definitive, contract-grade moisture measurements (especially concrete slabs) pair it with formal tests or a contact pin meter — use the MESTEK primarily to locate problem areas and speed up inspection workflows.